Oil and Grease remover
/
79 in stock, ready to ship
Couldn't load pickup availability
Winseal Oil and Grease cleaner is a powerful surface cleaner formulated specifically to penetrate porous mineral substrates such as stone, concrete, pavers, brick, and masonry, and lift embedded oil, grease, lubricant, and hydrocarbon residues from deep within the pores.
Unlike surface cleaners that only affect superficial marks, Winseal Oil and Grease cleaner reaches below the surface, dissolving oils that have soaked into the substrate over time.
This cleaner is designed to restore surface appearance and prepare the substrate for further care systems (like Winseal water repellents or Winseal protective coatings) while minimizing harsh mechanical scrubbing or abrasive treatments.
WHERE IT CAN BE USED
WHERE IT CAN BE USED
It is suitable for both interior and exterior porous and non porous stone surfaces:
- Natural stone (granite, sandstone, limestone, marble)
- Concrete (driveways, floors, walkways)
- Brick and masonry surfaces
- Pavers and patios
- Garage floors and parking areas
- Industrial floors with oil/grease stains
- Workshop, service bays and machine area floorings
Typical application areas include -
- Engine oil drips
- Food oil stains on exterior and interior floors
- Hydraulic fluid marks
- Machine grease stains
- Industrial drips on hard mineral substrates
TECHINICAL DETAILS
TECHINICAL DETAILS
Coverage: 4 to 10 m2 per Ltr
(Actual coverage depends on substrate porosity and surface texture.)
Recommended Application Tools
- Brush
- Roller
- Low-pressure sprayer / garden sprayer
- Soft bristle nylon brush
Ensure consistent wetting of the surface during application to maximize cleaning performance.
How to use?
Application Details
- Sweep or blow away loose dust and debris.
- Apply Winseal Oil & Grease Remover in undiluted form directly onto the affected area using a brush, roller or low-pressure sprayer.
- Allow 5-10 minutes of dwell time - The cleaner will penetrate and loosen the oil from within the surface
- Scrub lightly with a soft bristle brush or non-abrasive pad to lift residues.
- Rinse thoroughly with clean water.
- Repeat if required for heavy or deep oil penetration
- Allow the surface to dry before applying any protective coating.
Pro Tip: Always test on a small inconspicuous area to confirm compatibility, reaction and check the surface after rinsing with water.
Complete your Stone Care System
SYSTEM READY
Complete the Stone Surface Care System
To maximize surface care performance, consider pairing Winseal cleaners with the following:
- Efflorescence Remover - To remove the deep penetrated salts from the porous stones for complete and thorough treatment against recurring efflorescence.
- Limescale remover - To remove hard salt deposits on the stone surfaces
- Water Repellent – for preventing further efflorescence, fungus and mold growth while keeping the natural look and feel intact
- Clear Glossy Sealer - For creating a protective layer protecting from dust and water
- Premium Glossy sealer - For giving the stone surface a rich sheen while protecting the surface from weathering, fungus, mold, dust and dirt
- Look enhancer - For giving an enhanced wet look and stain repellency to the surface while keeping natural texture intact
COMPARE WITH CLEANING VS PROTECTION
A practical comparison for long-term surface care
COMPARE WITH CLEANING VS PROTECTION
A practical comparison for long-term surface care
-
Frequency
-
Fungus and Mold return
-
Water absorption
-
Surface ageing
-
Visual appearance
WHAT'S EVERYONE SAYING
“The look and feel of my stone walkway became as vibrant as when I got it installed”
—Vinayak Thorat - Venkatraman Associates (VA Group)
“Winseal totally transformed the look of my patio. It looks surreal now.”
—Tanay Anjikar - Siddhalaxmi Industries
"Winseal's Water Repellant coatings have helped prevent fungus and mold over our client's exposed brick facade. Even after years, the bricks look new. I'm very happy with the results."
—Mitalee Varadpande (Patil) - The Big Storey Architects