Marble Deep Clean and Wet Look Kit – Covers 200 Sqft - Natural finish
/
Hurry! Only 10 left in stock
Couldn't load pickup availability
Your Marble Has Beautiful Veins Hidden Under Years of Dullness. This Kit Brings Them Back.
A complete cleaner + coating kit for natural marble floors and walls. Removes dirt, general stains and dullness, then brings out the natural depth and veining of the stone with a rich wet look finish that protects against water and stains for years. Covers 200 SqFt.
Gives a Wet Look, brings out the natural veining of the marble, provides Water and Stain Resistance.
WHATS INSIDE THE KIT?
WHATS INSIDE THE KIT?
- Winseal Heavy Duty Cleaner - 5 Ltrs
- Winseal Wet Look Enhancer (Marble & Granite) - 2 Ltrs
- Coverage - Upto 200 SqFt
BEFORE AND AFTER - WHAT TO EXPECT?
BEFORE AND AFTER - WHAT TO EXPECT?
Before: Flat, dull surface. Veining hard to see. Stains that won't lift with regular mopping. Surface looks like ordinary white stone.
After: Rich, deep wet-look finish. Veins sharp and visible. Spills bead up and wipe off. Marble looks like it was just installed.
THE PROBLEM THIS KIT SOLVES
THE PROBLEM THIS KIT SOLVES
Marble is one of the most expensive surfaces you can put in a home. Every slab is unique — the veining, the depth, the colour variation. That's exactly what you paid for.
But marble is also one of the most porous natural stones. Without protection, it absorbs everything — water, cooking oil, tea, coffee, soap residue from mopping. Over months and years, that absorption dulls the surface. The veining fades into the background. The depth disappears. What was once the most striking surface in the room starts to look flat, stained and ordinary.
Professional marble polishing restores it — but it's expensive, disruptive, and needs to be repeated. And it still doesn't seal the surface, so the dulling starts again immediately.
This kit solves it differently. The Heavy Duty Cleaner is formulated to remove built-up residue from marble without scratching or etching the surface. Once clean, the Look Enhancer is applied — soaking into the marble, bringing the veining and natural colour back to full depth, and forming a protective layer that repels water and stains from the inside out.
The result is marble that looks the way it did when it was first installed — or better. The veins are sharp. The depth is back. And it stays that way without monthly maintenance or professional intervention.
COVERING MORE AREA? GET LOWER COST PER SQFT
COVERING MORE AREA? GET LOWER COST PER SQFT
Use code MARBLE60 at checkout for discount upto 30% on buying for 400 SqFt or more area (more than 2 kits of 200 sqft)
Use code MARBLE70 at checkout for discount upto 45% on buying for 1000 SqFt or more area (more than 5 kits of 200 sqft)
Built for Consistency
Application Details
CLEAN
- Remove dust and debris, slightly wet the surface with water before applying the cleaner
- Spray Winseal Heavy Duty Cleaner on the surface using a sprayer, without diluting it.
- Allow 2-3 minutes of dwell time, where the cleaner will loosen the dust and dirt deposits.
- Scrub lightly with a soft bristle brush or non-abrasive pad to lift residues.
- Rinse thoroughly with lots of clean water.
- Repeat if required for heavy scaling.
- Allow the surface to dry for 24 hours.
COAT
- Shake the product container well
- Apply the Winseal Wet Look Enhancer to the surface using a microfiber cloth. Dip the cloth in the coating, and spread it evenly on the granite surface.
- Allow the product to penetrate and work its magic for 10-20 minutes.
- Then wipe off any excess from the surface with a clean, dry cloth to prevent uneven enhancement.
- Allow the coating to dry for 24 to 48 hours.
Complete your Stone Care System
FAQ
Will the Look Enhancer change the colour of my marble?
Will the Look Enhancer change the colour of my marble?
It deepens the natural colour and richness the way marble looks when it's slightly wet without painting over it or looking artificial. Think of it as your marble's best version of itself.
Do I need to use the cleaner first, or can I go straight to the coating?
Do I need to use the cleaner first, or can I go straight to the coating?
Always clean first. Dust, grime or old residue on the surface stops the coating from bonding evenly, and you'll end up with a patchy enhancement. That's exactly why the Heavy Duty Cleaner is in the kit.
How long will the wet-look finish last?
How long will the wet-look finish last?
Up to 3 years under normal conditions. It's not permanent, but it holds up far longer than a standard polish or wax, especially indoors with lighter foot traffic.
Can I use this on bathroom marble walls?
Can I use this on bathroom marble walls?
Yes — the Look Enhancer works very well on vertical surfaces. Just ensure you clean the surface, and apply the coating on a completely dry surface. Allow the coating to dry and cure completely for 24-48 hours before allowing water to fall on it.
What if I have more than 200 sqft?
What if I have more than 200 sqft?
Simple math for 400 sqft, get 2 kits; for 1000 sqft, get 5 kits. Check the listing image for multi-kit discount codes; the bigger the area, the lower your per sqft cost.
Whats Everyone Saying
“The look and feel of my stone walkway became as vibrant as when I got it installed”
—Vinayak Thorat Venkatraman Associates (VA Group)
“Winseal totally transformed the look of my patio. It looks surreal now.”
—Tanay Anjikar Siddhalaxmi Industries
"Winseal's Water Repellant coatings have helped prevent fungus and mold over our client's exposed brick facade. Even after years, the bricks look new. I'm very happy with the results."
—Mitalee Varadpande (Patil) The Big Storey Architects
