Heavy Duty Cleaner 250 ml + Premium Glossy Coating 500 Gms Combo
/
33 in stock, ready to ship
Couldn't load pickup availability
A complete solution to deep clean and enhance stone surfaces with a rich, long-lasting satin-finish.
The Winseal Heavy-Duty cleaner removes tough dirt, stains and surface buildup, restoring the original condition. This is followed by the Winseal Premium Glossy sealer that enhances the colour with a rich satin-gloss finish while forming a durable protective layer against water, stains and daily wear. Ideal for surfaces that need both restoration and a strong, elegant finish
WHERE IT CAN BE USED
WHERE IT CAN BE USED
It is suitable for both interior and exterior porous and non porous stone surfaces:
- Natural stone surfaces (granite, sandstone, limestone, marble etc)
- Concrete surfaces (exposed concrete, sidewalks, driveways)
- Brick & masonry walls
- Porcelain / ceramic / vitrified tiles
- Terracotta and pavers
- Facade claddings
- Outdoor patios, balconies, garden paths
Typical application areas include -
- Outdoor walls and facades
- Damp Balconies and terraces
- Driveways and pathways
- Stone cladding exposed to rain
- Pool decks
- Moss or green stained walls
HOW TO USE
HOW TO USE
- Apply the product to a surface that is clean, dust-free, grease-free and dry. Clean the surface using a suitable cleaner and allow the surface to dry completely.
- Use the product neat, do not dilute.
- Apply the coating to the surface in one coat using a roller or brush.
- Excess material should be removed using a linkt cloth or a microfiber cloth to prevent inconsistencies in the enhancement
- Allow the coating to dry and cure fully for a period of 48 hours before use.
Built for Consistency
Application Details - How to Use
Sweep or blow away loose dust and debris.
Apply Winseal Heavy Duty Cleaner in undiluted form directly onto the affected area using a brush, roller or low-pressure sprayer.
Allow 2-3 minutes of dwell time - The cleaner will penetrate and react with the surface stains, fungus, mold, dirt and salt deposits loosening it.
Scrub lightly with a soft bristle brush or non-abrasive pad to lift residues.
Rinse thoroughly with clean water.
Repeat if required for heavy deposits of fungus, dust, hard water scaling etc.
Allow the surface to dry before applying any protective coating.
Dilute the coating - Winseal Premium Glossy coating, with water upto 30%, i.e for 1 Kg of material, mix not more than 300 ml of water, and mix the coating well till it forms a homogenous mixture.
Apply the coating to the surface in two or more coats using a roller or brush.
While applying the coating, ensure that the coating is applied evenly to the entire surface using a brush or roller.
While the coating is wet, use a second dry roller to absorb the excess coating from the surface.
This ensures that we do not use excess coating and achieve an optimum thickness of coating.
Allow the coating to dry for 4 to 6 hours.
Apply the second coat in a similar manner, using two rollers - one for applying the coating, and the second to absorb excess coating from the surface.
Allow the coating to dry and cure fully for 48 hours before use.
Complete your Stone Care System
SYSTEM READY
Complete the Stone Surface Care System
To maximize surface care performance, consider pairing Winseal cleaners with the following:
- Efflorescence Remover - To remove the deep penetrated salts from the porous stones for complete and thorough treatment against recurring efflorescence.
- Limescale remover - To remove hard salt deposits on the stone surfaces
- Oil & Grease Remover – for driveways or areas with organic and oily contaminants.
- Water Repellent – for preventing further efflorescence, fungus and mold growth while keeping the natural look and feel intact
- Clear Glossy Sealer - For creating a protective layer protecting from dust and water
- Premium Glossy sealer - For giving the stone surface a rich sheen while protecting the surface from weathering, fungus, mold, dust and dirt
Four Key Features
- No harsh acid
- Water based
- Non corrosive, Non irritant
- Safe for all mineral stone surfaces
COMPARE GENERAL CLEANING VS WINSEAL PROTECTION
A practical comparison for long-term surface care
COMPARE GENERAL CLEANING VS WINSEAL PROTECTION
A practical comparison for long-term surface care
-
Impact on Natural stone
-
Repeat cleaning requirement
-
Ease of use
-
Surface ageing
-
Protective coating performance
Whats Everyone Saying
“The look and feel of my stone walkway became as vibrant as when I got it installed”
—Vinayak Thorat Venkatraman Associates (VA Group)
“Winseal totally transformed the look of my patio. It looks surreal now.”
—Tanay Anjikar Siddhalaxmi Industries
"Winseal's Water Repellant coatings have helped prevent fungus and mold over our client's exposed brick facade. Even after years, the bricks look new. I'm very happy with the results."
—Mitalee Varadpande (Patil) The Big Storey Architects