Fungus and Mold remover
/
100 in stock, ready to ship
Couldn't load pickup availability
Damp stone or concrete can quickly develop black fungus, green algae and mold stains.
This ready-to-use cleaner penetrates the surface, kills fungus and bacteria at the root, and removes visible growth safely. By neutralizing the source of contamination, it helps prevent regrowth and keeps surfaces cleaner for longer.
Restores hygiene. Prevents recurring growth.
WHERE IT CAN BE USED
WHERE IT CAN BE USED
It is suitable for both interior and exterior porous and non porous stone surfaces:
- Natural stone surfaces (granite, sandstone, limestone, marble etc)
- Concrete surfaces (exposed concrete, sidewalks, driveways)
- Brick & masonry walls
- Porcelain / ceramic / vitrified tiles
- Terracotta and pavers
- Facade claddings
- Outdoor patios, balconies, garden paths
Typical application areas include -
- Outdoor walls and facades
- Damp Balconies and terraces
- Driveways and pathways
- Stone cladding exposed to rain
- Pool decks
- Moss or green stained walls
TECHNICAL DETAILS
TECHNICAL DETAILS
Coverage: 6 to 12 Sqmt per Ltr
(Actual coverage depends on substrate porosity and surface texture.)
Recommended Application Tools
- Brush
- Roller
- Low-pressure sprayer / garden sprayer
- Soft bristle nylon brush
Ensure consistent wetting of the surface during application to maximize cleaning performance.
Built for Consistency
Application Details
- Sweep or blow away loose dust and debris.
- Apply Winseal Mold and Fungus remover in undiluted form directly onto the affected area using a brush, roller or low-pressure sprayer.
- Allow 10-15 minutes of dwell time - The cleaner will penetrate and react with the biological growth.
- Scrub lightly with a soft bristle brush or non-abrasive pad to lift residues.
- Rinse thoroughly with clean water.
- Repeat if required for heavy vegetative growth
- Allow the surface to dry before applying any protective coating.
Pro Tip: Always test on a small inconspicuous area to confirm compatibility, reaction and check the surface after rinsing with water.
Complete your Stone Care System
SYSTEM READY
Complete the Stone Surface Care System
To maximize surface care performance, consider pairing Winseal cleaners with the following:
- Efflorescence Remover - To remove the deep penetrated salts from the porous stones for complete and thorough treatment against recurring efflorescence.
- Limescale remover - To remove hard salt deposits on the stone surfaces
- Oil & Grease Remover – for driveways or areas with organic and oily contaminants.
- Water Repellent – for preventing further efflorescence, fungus and mold growth while keeping the natural look and feel intact
- Clear Glossy Sealer - For creating a protective layer protecting from dust and water
- Premium Glossy sealer - For giving the stone surface a rich sheen while protecting the surface from weathering, fungus, mold, dust and dirt
Four Key Features
- No harsh acid
- Water based
- Non corrosive, Non irritant
- Safe for all mineral stone surfaces
COMPARE GENERAL CLEANING VS WINSEAL PROTECTION
A practical comparison for long-term surface care
COMPARE GENERAL CLEANING VS WINSEAL PROTECTION
A practical comparison for long-term surface care
-
Impact on Natural stone
-
Repeat cleaning requirement
-
Ease of use
-
Surface ageing
-
Protective coating performance
WHAT'S EVERYONE SAYING
“The look and feel of my stone walkway became as vibrant as when I got it installed”
—Vinayak Thorat - Venkatraman Associates (VA Group)
“Winseal totally transformed the look of my patio. It looks surreal now.”
—Tanay Anjikar - Siddhalaxmi Industries
"Winseal's Water Repellant coatings have helped prevent fungus and mold over our client's exposed brick facade. Even after years, the bricks look new. I'm very happy with the results."
—Mitalee Varadpande (Patil) - The Big Storey Architects